Multidisciplinary Journal of Science and Technology

STUDY OF THE PROCESS OF CLEANING MACHINE-HARVESTED COTTON FROM SMALL IMPURITIES IN SAW GINS

R.Sh. Sulaymanov

"Cotton Industry Scientific Center" JSC,

Z.J. Omonov

Tashkent State Technical University,

M.N. Ismatov

Tashkent State Technical University,

U.A. Saytov

Tashkent State Technical University

O.Q. Rayimqulov

Tashkent State Technical University

##semicolon## UXK aggregate, supplier-cleaner, saw gin, mesh surface, cotton, fiber, seed, dirt, performance, cleaning efficiency, quality.

---

सार

The cleaning efficiency of the machine-picked S-6524 selected grade 2 cotton in the UXK unit of the technology was 80.4% on average, and it showed that it was 12 (abs)% less than the cleaning efficiency of the passport when cleaning high-grade cotton. After the UXK unit, when cotton is cleaned in the 5DP-130 type saw gin supplier-cleaner, the cleaning efficiency of the supplier is equal to 10.1% on average, and it is found that it is 4.9 (abs)% less than the cleaning efficiency in the technical characteristics. The productivity of the gin when ginned in the cleaned cotton gin was on average 1261 kg/h, which was 30% lower than the productivity in the passport. When the ginned fiber was cleaned in the post-ginning fiber cleaner, the mass fraction of defective fiber and impurity in the fiber was high, on average 2.36%. It was determined that the high mass fraction of defective fibers and dirty impurities in the fiber composition is due to the insufficient separation of small impurities from the cotton content in the UXK aggregate. It was studied that adding additional working parts to the unit is not possible from the point of view of technical requirements and causes additional consumption of electricity and spare parts.

It was determined that in order to effectively clean cotton from small impurities before the ginning process, to increase gin productivity, and to improve the quality of produced fiber and seed, it is necessary to improve the mesh surface, which is the main working part that performs the process of cleaning cotton from small impurities in the gin supplier-cleaner.

---

##submission.citations##

A.M. Salimov, A. Ismailov. Technology of industries. TITLP, Tashkent. 2018.- 292 p.

Rs. Sulaymanov, Z.J. Omonov, J.J. Dusiyorov. Research on the effectiveness of a sawdust cleaner-cleaner. Scientific-technical and practical journal of composite materials of Uzbekistan. #4, Tashkent. 2023. p. 187-190.

Sulaymanov R.Sh., Akhmedov M.Kh., Gapparova M.A. Research on methods of increasing the efficiency of the saw blade. International scientific-practical conference on "Modern concepts of quality assurance of cotton, textile and light industrial products", Namangan 2021, p. 22-25.

E.T. Maksudov, R.Sh. Sulaymanov, Kh.Kh. Aminov, D.Kh. Umarkhodjaev. Improving the quality of fiber produced from hard-to-clean selective cotton// Journal of science and innovative development. Tashkent. 2018. No. 1.- 103-111 p.

Sulaymanov R.Sh. Innovative technology in cotton ginning with high productivity. "Innovative development of cotton: theoretical and practical principles" Materials of the scientific-practical conference dedicated to the International Cotton Day. Ministry of Innovative Development. Tashkent, 2021.105-108 p.

MaksudovE.T., SulaymonovR.Sh., UmarkhodjaevD.H.. Ddevelopment of effective technology of fiber cleaning. jural «European science review». Austria, Viena. 2018, №9-10, -Р. 186-188.

Mardonov B.M., Sulaymanov R.Sh., Akhmedov M.Kh. Issledovanie pitayushchey zony rabochey kamery pilnogo dzhina. Innovative solutions to technical, engineering and technological problems of production" International scientific and technical conference Part 1. Jizzakh, 2021. 741-744 p.

Passport for saw gin brand 5DP-130. Tashkent. TSKB for cotton ginning, 1983.- 14 p.

R.Sh. Sulaimonov, E.T. Maksudov. Improving the fiber quality of difficult-to-clean selections of raw cotton, hand- and machine-harvested // Collection of materials of the international conference “Prospects for an intensive approach to innovative development”. Part I, NAMITI, Tashkent, July 10-11, 2018. –pp.417-420.

R. Sh. Sulaymanov, B.Kh. Marufkhanov, D.Kh. Umarkhodzhaev, U.K. Karimov. Оchistka volokna trudnoochishchaemyx selektsiy mashinnogo sbora. "Actual problems of innovative technologies in the context of integration of science, education and production. Weaver-2017". A collection of articles of the republican scientific-practical conference. Part I, branch I. Tashkent, TTESI. May 16-17, 2017. -11-13 p.

Maksudov I.T., Nuraliev A.N. Collection of instructions and methods for technical control and quality assessment of raw cotton and its processed products in the cotton ginning industry. Tashkent. Mekhnat, 1992.- 340 p.

UzDst 615:2018. Cotton. Technical conditions. Tashkent, 2018.- 4 p.

UzDst 644:2006. Cotton. Moisture detection methods. Tashkent, 2006.- 17 p.

Coordinated technology of cotton preliminary processing (PDI 70 -2017). A.S. Under the general editorship of Kamalov. Tashkent, 2017, 91 p.

UzDst 601:2016. Cotton. Technical seed. Technical conditions. Methods of determining fertility. Tashkent, 2016.- 11 p.

UzDst 597:2016. Cotton technical seed. Methods for determining the mass fraction of defects in seeds. Tashkent, 2011.- 16 p.17.

Sulaymonov R., Dusiyorov J., Omonov Z. Research on the efficiency of saw gene cleaner. Publishing house State Unitary Enterprise “Fan va Tarakkiyot”. Tashkent, №4/2023.-4 b.

Malikov Z.M., Nazarov F.Kh., Abdukhamidov S.K., Omonov Z.J. Numerical study of flow in a plane suddenly expanding channel based on Wilcox and two-fluid turbulence models. Journal of Physics: Conference Series.1901 (2021) 012039

Shoev M., Safarov T., Abdukhamidov S., Omonov Z. Numerical solution of the heat transfer equation using different schemes. E3S Web of Conferences , 040 (2023) IPFA 2023

Shoyev M.A., Ibroximov A.R., Madaliev M.E., Dusiyorov J.J., Rayimqulov O.Q., Ismatov M.N. Numerical study of modified centrifugal cyclone. E3S Web of Conferences 401, 01036 (2023) CONMECHYDRO-2023.

Xudoynazarov D.X., UmarovU.E., YunusovaM.U., UngboyevA.M. Theoretical and experimental determination of the dimensions of the slope and length of the feed distribution device for family livestock farms. E3S Web of Conferences 486, 02004 (2024) https://doi.org/10.1051/e3sconf/202448602004 AGRITECH-IX 2024