PDF
ZENODO
Published
2025-05-13
Section
Articles
How to Cite
How to Cite
PARAMETERS OF THE OPENING ANGLE OF THE WINGED BLADES IN THE FERTILIZATION SYSTEM OF A CHISEL-CULTIVATOR
Dusiyorov J.J.
Tashkent State Technical University
Botirov S.G‘.
Tashkent Metro State Unitary Enterprise
O‘ngboyev A.M.
Tashkent State Technical University
Keywords: winged blade, opening angle, crumbling angle, coverage width.
Abstract
Due to ongoing climate change, the demand for water in agriculture is increasing annually, while water scarcity becomes more pronounced. Therefore, every drop of water must be efficiently conserved. Mineral nutrients are applied to improve the reclamation status of saline and gypsiferous soils before leaching them. However, these nutrients often do not reach the root layer of plants. To address this issue, we conducted a study to determine the optimal opening angle of the winged blades in the fertilizer system of a chisel-cultivator.
References
[1]. Abdumominov I.I. (2022). Justification of the type and parameters of combined machines used for pre-sowing soil preparation. PhD Dissertation. Tashkent, p.114.
[2]. Khudoyberdiev T.S., Khudoyorov A.N., Boltaboev B.R., Razzakov B.A. (2019). Structure and operation of the ridge opener-fertilizer system. Proceedings of the international scientific-practical conference on agro-industry. Vol. 1, pp. 81–85.
[3]. Khudoyberdiev T.S., Razzakov B., Adhamov M. (2021). The technological process of the combined ridge opener-fertilizer. Agroilm Journal, No. 3, pp. 94–95.
[4]. Toshboltaev M. (Ed.) (2012). Adjustment and effective use of cotton and grain machinery. Tashkent: Fan, 214 p.
[5]. Editorial Board. (2016). Agricultural Reference Book. Tashkent: Fan va Texnologiyalar, 540 p.
[6]. Ponomaryov Mayskiy. (2017). Mechanization of Organic and Mineral Fertilizer Application. Saime, Essay 8. Certificate No. 217061500407.
[7]. Rajabov A., Toshboltaev M., To’xtaqoziyev A. (2017). Recommendations for land preparation. March 6. https://www.agro.uz/uz/
[8]. Listopad G.E. (Ed.) (1976). Agricultural and Reclamation Machines. Moscow: Kolos, 752 p.
[9]. Agrovestnik (Russia). (2017). Fertilizer Application Methods. Issue No. 7. Source: pesticidy.ru
[10]. Rudakov G.M. et al. (1981). Handbook on Cotton Mechanization. Tashkent: Uzbekistan, 238 p.
[11]. Sokolov F.A. (1977). Agronomic Foundations of Complex Mechanization in Cotton Production. Tashkent: Fan, 223 p.
[12]. Bosogo E.S. (Ed.) (1978). Theory, Design, and Calculation of Agricultural Machines. 2nd ed. Moscow: Mashinostroenie, 565 p.
[13]. Tokhtakoziev A., Toshpolatov B.U. (2013). Methods for improving the performance and energy efficiency of chisel cultivators. Collected scientific works of UzMEI. Tashkent, pp. 243–265.
[14]. Hasanov, S., Mardonov, U., Ongboyev, A., Ismatov, M. (2024). Influence of a magnetic field on HSS tool wear/life and the intensity of external machining environments in turning. International Journal of Mechatronics and Applied Mechanics. Available at https://www.scopus.com/record/display.uri?eid=2-s2.0-85197351635&origin=recordpage
[15]. Xudoynazarov D.X., Umarov U.E., Yunusova M.U., Ungboyev A.M. Theoretical and experimental determination of the dimensions of the slope and length of the feed distribution device for family livestock farms. E3S Web of Conferences 486, 02004 (2024) https://doi.org/10.1051/e3sconf/202448602004 AGRITECH-IX 2023 7 February 2024.
[16]. Mamasobirov U.M., Shoobidov Sh.A., Kovalevskiy V.I. Compensation for chain gearing errors by longitudinal modification of the sprocket teeth. https://www.scopus.com/record/display.uri?eid=2-s2.0-85112301012&origin=resultslist&sort=plf-f&src=s&sid=b3f790ead6ea7a405d890b9b66f2f4ce&sot=a&sdt=sisr&s=SOURCE-ID+%2821100831437%29&sl=23&sessionSearchId=b3f790ead6ea7a405d890b9b66f2f4ce International Journal of Mechatronics and Applied Mechanics Volume 1, Issue 9, Pages 232 – 2382021
